Skip navigation

Tag Archives: Webcam Security

Ever wanted to be able to check in on your house while you were away?  is a piece of open source software that enables your webcams, that you may have laying around the house, work as motion detectors. Motion should run on most linux distributions but for this tutorial, I’m using the desktop version of  linux.


  • PC with Ubuntu installed
  • USB webcam(s)
  • 30-90 minutes of free time

Step One

Okay lets start off by downloading the linux driver for your webcam. This great man wrote a single driver that is compatible with about 260 different webcams! You can download it here, to your desktop preferably. If this driver does not work for your camera please search  for the right driver.

Once you’ve downloaded the driver we can start compiling it, but first make sure you have the package build-essential installed you can do so by typing in sudo apt-get install build-essential into the terminal, information on this package can be located here.


We are now ready to start compiling the source code for the driver. Once we extract the .tar.gz file by right-clicking on it and selecting Extract Here. This should take a few seconds to complete.

Then open up terminal again and type in cd ~/Desktop/gspcav1-20071224, then type ./configure, this should take a minute or two (don’t worry if this gives out errors, just precede to compiling).

After that, start compiling it by typing in make. After it’s been compiled you can install it by typing in sudo make install this will install the package. You should now have a webcam that is recognized by linux now!

Step Two

Ubuntu has added Motion to the repository so it is now super easy to install (no compiling required). All you need to do to install Motion is, type sudo apt-get install motion in the command line.

sudo apt-get install motion

Step Three

It’s now time to setup Motion’s configuration files. You can download my config files that I’ve already filled in; here (read through the entire motion.conf file and change the settings to fit your needs).

Put the files in the Motion file in your /etc/motion/ folder on your server by first extracting the files onto the desktop, then typing sudo mv ~/Desktop/Motion Config.zip_FILES /etc/motion/ into the terminal.

sudo mv motion config

Please note: that if you have more than one webcam you will need one thread.conf for each extra cam (example; thread0.conf, thread1.conf, thread2.conf) You will also need to add the links to these files at end of the motion.conf file.

Step Four (optional)

Wput is a command line FTP client that allows you to upload security photos to a remote FTP server. To install this type sudo apt-get install wput into the terminal. We can configure Motion to use wput to upload photos that have been taken by adding

# Command to be executed when a picture (.ppm|.jpg) is saved (default: none)# The filename of the picture is appended as an argument for the command.on_picture_save wput ftp://USERNAME:PASSWORD@REMOTE SERVER %f

to your motion.conf file (if your using the motion.conf I provided this is already in there, just replace the server info in the ftp:// section)

Step Five

Lets make Motion startup automatically with the computer. Open “System” from the menu bar on the top of the screen, then “Preferences,” and “Sessions.” Create a new startup program type in a name for it and then type motion in the command section. Click “OK.” You can now restart the computer.

Motion Autostart


If you need more information about getting Motion running visit; here. There is also a ton of configuration options. From taking movies instead of photos, to launching a script when motion is detected; here. A wonderful person by the name of Morgan Storey has made a few scripts available, to automate the mundane process of activating motion when you leave (via screensaver) and help clean up after Motion (deleting old security photos locally and over FTP). Here are the scripts if you would like to use them.


You should now be able to open a web interface for Motion now by typing in localhost:8000 from the server itself or XXX.XXX.X.XXX:8000 from another computers web browser. To view a live stream of your webcam type localhost:8001 from the server itself or XXX.XXX.X.XXX:8001 from another computers web browser. You can change settings from this interface here too, you can even make Motion generate it’s own config files to fit your setup exactly!

Enjoy your new home-brew security system! All thanks to  and all the other great open source developers. Keep up the great work!